Rodgers A698 Provozní pokyny stáhnout pdf (Strana 22)

Locking a Combination Memory

When shipped from the Rodgers factory, all memory levels are unlocked so that pistons can be

easily changed. If desired, each memory level can be locked individually so that it cannot be

changed.

On instruments with combination action pistons M1, M2, etc., any memory level can be

locked using the following procedure:

1. Press and hold the memory piston (M1, M2, M3, etc.) corresponding to the

memory level you want to lock until the memory bank screen appears. Internal

or Memory Card and (#) Unlocked or (#) Locked appears in the display.

2. If (#) Unlocked appears, go to step 3. If (#) Locked appears, the memory level is

already locked.

3. Turn the Select knob to highlight Unlocked.

4. Rotate the Alpha Dial to select Locked. The memory is now locked and that

memory level cannot be changed.

On instruments with the M+ and M- pistons, memory level may be locked using the one

of the following procedures:

1. Use M+ or M- pistons to select the memory level to be locked.

2. Press and hold SET then press and release M+.

3. Turn the Select knob to highlight Unlocked.

4. Rotate the Alpha Dial to highlight Locked.

OR, depending on model

1. Use M+ or M- pistons to select the memory level to be locked.

2. Press the QUICK MENU piston. Use the Select knob next to the display to scroll

down until Console appears in the display.

3. Press the QUICK MENU piston. Use the Select knob to scroll down until

MemoryLevel Lock appears in the display.

4. Press the QUICK MENU piston.

5. Turn the Alpha Dial until Locked appears in the display.

6. Press the STOP piston (located under the Choir manual to the right) three times

to exit this mode.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 45 46

Žádné komentáře

Rodgers A698 Provozní pokyny Strana 22