Rodgers A698 Provozní pokyny stáhnout pdf (Strana 24)

Restoring Factory Combination Settings

If the original factory settings have been overwritten or erased, and you would like to

restore them, use the following procedure:

1. Press and hold the memory piston to be restored (M1, M2, or M3) until the

Memory Bank screen appears. The display shows Memory Bank and Unlocked

or Locked (if locked, see the unlocking procedure in the previous section).

2. Turn the Select knob until Restore Factory appears in the display.

3. Press and release SET.

4. Turn the Select knob highlight No.

5. Rotate the Alpha Dial to highlight Yes.

6. Press and release SET.

7. Press and hold Cancel (O) until Transposer O appears in the display.

8. Power the instrument off and on. The selected memory has been restored to

factory defaults.

To restore the default setting using the M+ and M-, use one of the following procedures:

1. Use M+ or M- pistons to select the memory level to be unlocked.

2. Press and hold SET and press M+. The display shows Memory Bank and

Unlocked or Locked (if locked, see the unlocking procedure in the previous

section).

3. Turn the Select knob until Restore Factory appears in the display.

4. Press and release SET.

5. Turn the Select knob highlight No.

6. Rotate the Alpha Dial to highlight Yes.

7. Press and release SET.

8. Press and hold Cancel (O) until Transposer O appears in the display.

9. Power the instrument off and on.

The selected memory has been restored to factory defaults.

OR, depending on model

1. Press and hold SET and press M+. The display shows Locked or Unlocked.

2. Select Unlocked.

3. Press and hold SET and press M+ again for several seconds until the display reads

Press Set + 0 to load factory default. Factory defaults loaded will appear in the

display.

The memory has been returned to factory defaults.

2 Each memory must be individually restored, by performing the above procedure.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 45 46

Žádné komentáře

Rodgers A698 Provozní pokyny Strana 24